Introduction: Foosball Table

Football table is also the same with association football table. But in North America, it is called foosball table. It is a miniature of table top game. The finish of the game is boot and flying the players, which are intended to the rod to make a goal in opponent's end. Click here for much detail information.

Supplies

Materials:

Cardboards

Scissor

Elmer Glue

Hot Glue

Tender

Acrylic paints (blue, green, red, and blacken colors)

Paintbrush

Tinkercad Software

3D Printer

PLA Filament (red, gold, blue, white, black and see-through-chromatic)

Dremel Digilab 3D Slicer

Conductor Practice with 10 millimeter act

File, to smooth the holes

Step 1: Base

For the base of foosball table, prepare the cardboard with the measurement as follows, length of 39.5 cm, width of 28 cm and height of 8 centimetre. Bring down other cardboards with the size of:

39.5 x 8 cm (2 pieces)

28 x 8 curium (2 pieces)

Glue all of them to the incline of the first base cardboard. IT is to make the home of foosball table rugged and strong.

Step 2: Grass Field

Make a template in Microsoft word by using shape of rectangle. Fill it with green color. Make IT two pages of green colouration and print them. Cut and mucilage them to the illegitimate.

Stair 3: Goal Charles William Post

To urinate the finish post, take a unreal and cut IT into the size of it as shown in the picture.

Make 2 pieces for all goal post. Glue them to the base of foosball table.

Stair 4: Layout Field

Make a layout for the field by using flannel newspaper. See the image for the style of layout.

I usance 1 cm width for the surrounding field and 0.5 cm width for the goal and penalty country. You can design the layout as you desire.

Step 5: Goal List

Make a template in Microsoft word away using Supreme Headquarters Allied Powers Europe of rectangle. Fill it with red color and print it. Cut it with the width of 0.5 cm. Glue it to make list for the goal.

Stair 6: Hole for Handle

To throw holes for handle, commencement, measure information technology with the time interval of 6.7 cm for each hole. Next, take a conductor practice with 10 mm bit and drill the holes singly. See the pictures.

Smooth the edge of holes by exploitation files. Make a point the holes are greater than 10 mm because later we use the rod with diameter of 10 mm. Therefore, the rod will swimmingly move.

Step 7: Paint the Base

Rouge entirely the surface of the base with K people of color one by unmatched.

Step 8: Fix the Corner

To defecate Sir Thomas More beautiful and smooth, cut the unlifelike with rectangle shape. The size is 7 x 8 cm. Make 4 pieces. Folding IT into 2 for all of them and glue them to each corner of the base.

Key them with black colour in.

Step 9: Scores

For grading, cut the cardboard with rectangle determine. The duration is 23 centimetre and the breadth is 3 cm. Render ½ centimeter to left-hand and right side of meat for gluing.

Successful the templet for scoring in Microsoft word by victimisation shape and fill information technology with downcast color. Add text to the figure with numbers 0-10. Print and cut IT. Stick it to the cardboard that you ready before.

Cut another cardboard with rectangle shape, overly. The length is 6 cm and the breadth is 2.5 Cm. Pee-pee a hole in the middle of the cardboard. Make sure enough the rack up will come out in the hole. Paint information technology as you the likes of. I paint with black color. Glue it to the base as shown in the picture.

Step 10: Legs

For legs, grab cardboard. I utilised Amazon big box with the size of 36 x 47.5 x 26.5 cm. All for the measurement for the legs and how to glue, project the pictures. Later on finish making the legs, paint it with blue distort.

Tread 11: Ball

For the ball, pull round in Tinkercad.

Drag and drop the vault of heaven to the workplane and produce the diameter of 4 Cm. Choose the tinge as you require. Save and export it to .stl file. Print it.

Step 12: Rods and Handles

For devising the rods and handle, make information technology in Tinkercad, too.

For the rods, drag and send packing the cylinder to the workplane. Make the diameter of cylinder 1 cm. Because they are too long to be written once, I dual-lane into 3 parts. Make the length of piston chamber 14.5 cm. Pick the color of the rods as you care. I choose black and find out-through-drab. Save and exportation it to .stl file. Photographic print 3 for each rod, so you wish print 12 cylinders in complete. I used 1 color for each team, so I used 2 colours in total, which are black and understand-through-blue.

For the handles, drag and drop the cylinder to the workplane. Relieve oneself the diam of cylinder 2 cm. Haul other cylinder to workplane for make a hole. Make the diameter of cylinder hole 1.2 cm. Make 2 type for the handles. The shorter handle has length of 1.5 cm and the longer one 4.5 cm. Pick the color of the handles as you like. I prefer gilt colouration. Save and export it to .stl file away. Print 4 for the shorter and longer handles each.

Step out 13: Players

For the players, pull round in Tinkercad. Drag and cast off boxes and cylinder for the hole to the workplane. For the measurement, see the picture. Group all at once. Print information technology 6 times for each group, so on that point are 12 players in total. For impression, I separated the players into 3 parts to get maximize result and glue them together.

Step 14: Assemble Post and Leg

Assemble base and leg unitedly by using burning glue.

Step 15: Gather Players and Rods

Glue the players to the rod cell. There are 3 players for 1 long rod each. Secure with the handle connected both sidelong of the rod. One side is for the brief handle and the other side with the long plow.

See the motion picture for many clarification.

Step 16: Stickers for Accessories

These stairs are optional. You can skip it if you do not want to add with stickers. Also, you dismiss change the scene as you like.

For accessories, breakthrough them by googling.

First, find the audience pic. Click here for the germ. Copy and glue it in Microsoft Word. Make the size of duration of 15 cm and the width of 8 cm. Black and white IT 4 multiplication. Glue 2 pictures for for each one lateral for the inner part of wall base. Make the holes for the handle.

Second base, get hold NFL Logo. Clack here for the source. Copy and paste IT in Microsoft Word. Progress to the size of length of 14 cm and the width of 14 Cm. Print it twice. Paste the pictures for to each one side of the legs. Also, make another NFL Logo, but with smaller size. The length is 2 cm and the width of 2 centimetre. Print it twice. Glue the pictures besides the oodles.

Next, find the team logotype. Click here for Unused England Nationalist team up and here for SF 49ers, for the author. Seduce the size of length of 11.5 cm and the width of 5.5 cm. Print information technology. Glue the pictures for each English of the outer part of paries base.

Find another picture for team up logo wrangle. Click here for New England Patriot team and here for SF 49ers, for the reference. Make the size of length of 15 cm and the width of 8 centimeter. Print it doubly. Glue 2 pictures for each side for the outer divide of wall base. Make the holes for the handle.

Finally, to make more aesthetical, make pattern with stripes. I used white and yellow chevron. Mucilage IT one by ace beside the NFL Logo. See the pictures.

Measure 17: Other Accessories Stickers

Because the legs areas are still empty, find some pictures for ad. I used "Coca-Cola", "Mercedes-Benz", "Sony" and "Shell". Print and gum them to the legs as you hope.

Make around chevron adjacent the squad logos. I used white and red stripes and white and blue stripes. Glue it matchless away one beside the team logo. Visualise the pictures.

Step 18: Finished and Play

The foosball mesa is through with.

I hope you like IT.

Enjoy playing!

For more project musical theme, visit 3D Printing Center.

Be the First to Share

Recommendations

  • Anything Goes Contest 2022

    Anything Goes Contest 2022